Cooling thermostat

KT 08-42

Fryka cooling thermostats are not only suitable for cooling tasks directly in the bath tank with internal circulation, but also for cooling externally connected applications. The cooling thermostats can be regulated via the easy-to-use control and an internally installed temperature sensor. If necessary, the control can be switched to an external sensor that records the temperature in the bath tank and thus enables direct control according to the relevant temperature.

-40°C to +20°C
8l
with temperature control
with pump

Characteristics

Environmentally friendly and energy-saving thanks to natural refrigerants
Refrigeration unit: low noise, hermetically sealed, air-cooled, low maintenance
Electronic temperature control with easy-to-read LED display
No electronic control over the bath which is exposed to the vapours
Casing parts and bath tank made of high quality stainless steel
Drain valve allows liquid to be easily drained from the bath
Housing protection rings at the top and bottom of the device
Four mounting bolts (internal thread M8) on the corners of the bath for attaching support rods
Including an external temperature sensor for measuring the temperature in the bath tank
Removable bath cover and circulation pump
Easy to clean: Interior free of fixtures, rounded corners
Frame heating prevents condensation in the edge area

Technical data

Model	KT 08-42
Operation	-40°C to +20°C
Bath volume	8 l
Bath dimensions [WxDxH]	15 x 30 x 20 cm
External dimensions [WxDxH]	34,5 x 45,5 x 66,5 cm
Electrical connection	230 V / 50 Hz
Max. current	2,5 A
Weight	35 kg
Circulation	Pump
Flow rate	5 l/min
Flow pressure	0,15 bar
Hose connections	12 mm

Technische Daten nach DIN 12876
* GWP: Global Warming Potential (Treibhauspotential) nach IPCC IV

Temperaturbereich: -10°C bis +40°C Temperaturkonstanz bei -10°C: +/- 0,5 K Anzeigeauflösung: 0,1 K Kälteleistung bei 20°C: 1000 W Kälteleistung bei 10°C: 800 W Kälteleistung bei 0°C: 550 W Kälteleistung bei -10°C: 300 W Förderstrom [max.]: 12 l/min Förderdruck [max.]: 2,9 bar Schlauchanschlüsse: 12,7 mm Füllvolumen: 2,5 bis 9,0 l Abmessungen [BxTxH]: 35 x 45 x 68 cm Aufstellungsmaße [BxT]: 35 x 75 cm Gewicht: 39 kg Schalldruckpegel [Abstand 1m]: 52 dB(A) Zulässiger Umgebungstemperaturbereich: 5°C bis 40°C Max. zulässige Temperatur der Temperierflüssigkeit: 60°C Elektrischer Anschluss: 230 V / 50 Hz Leistungsaufnahme: 800 W Stromaufnahme [max.]: 5,0 A Schutzart: IP 20 Klasseneinteilung: I / NFL Max. Betriebsdruck: 25 bar Kältemittel: R290 (GWP 3*) Mindestraumvolumen: 12 m³

Options

RS485-Schnittstelle zur Modbus-Kommunikation

Ermöglicht die Anbindung an Steuerungssysteme

Accessories

Schlauch Ø 10mm

16 bar
bis -20°C
PVC | mit Gewebe
passend für Schlauchanschluss Ø 10mm
Meterware